echen
8/17/2012 1:12:39 PM
User Rank Beginner
Re: This is true 3D-IC integration
Hi max,
Very interesting. But is there any conflit with SOItec patent?
Regards
Eddy
Re: This is true 3D-IC integration
@torki: Very interesting -- I will have to check them out :-)
Re: 1um BEOL thickness ?
@torki: Great -- thanks for this input -- for my paper I was just trying to give a "feel" for it all -- but it's nice to know I was so close -- and if I ever give a talk about this technology, will all of the info provided by everyone's feedback I will be able to nail the numbers :-)
torki
8/2/2012 5:12:32 AM
User Rank Beginner
Re: This is true 3D-IC integration
SmartCut process is pattented and owned by SOITEC. This process exists since about 15 years. (US Patent 5882987)
Look at the animation at :
http://www.soitec.com/en/technologies/smart-cut/
Smart Stacking is pattented and owned by SOITEC. It is similar to what you are drawing.
http://www.soitec.com/en/technologies/smart-stacking/
torki
8/2/2012 5:02:02 AM
User Rank Beginner
Re: 1um BEOL thickness ?
Hi Mark,
Yes a range of 1um or 2um works.
At 28nm Mx (1 to 6) stack is about 6 times 180nm (metal and via).
So this is indeed 1.08 micron.
The mid-thick metal is 400nm (metal and via)
The thick metal is 1480nm (metal and via)
Regards,
Re: 1um BEOL thickness ?
@Brian C: Sometimes I amaze even myself (grin)
Seriously, thanks for rooting this information out and sharing it with us.
Brian C.
7/30/2012 3:11:16 PM
User Rank Beginner
Re: 1um BEOL thickness ?
Hi Max! I like your 'about 1 um'. Looking at the ITRS 2011 BEOL roadmap for MPUs (logic) Table IITC2 year 2012 (22nm node), metal 1 is 58nm thick, the intermediate metal layers (say #2 & #3) are either 115nm or 230nm (if 2X for ASICs), and global metal layers (say #4 & #5) are either 123nm or 492nm (if 4X for ASICs). Then adding it all up we get a range from 518nm to 1502nm; so 1.0+/-0.5um for the 5 layers of metal covers it. You are 'Magnificent'!
Re: 1um BEOL thickness ?
@torki: I did say that I was "rounding furiously" (grin) -- how about if we say "in the order of 1um" (double grin)
Re: Thermal could begain to be an issue at higher layer counts
@William: I agree -- heat is always a problem -- it's going to be interesting to see where this goes -- if people start using the technology in earnest then tool development will ramp up also.
Re: This is true 3D-IC integration
@Tork: "The process seems a variant of the SmartCut process from SOITEC. Are you collaborating with them?"
Nope -- I haven't even heard of them -- but I certainly would like to learn more about what they are doing (when I get a free moment).
|
 |
In addition to applications for reprogrammable hardware and processors in the Internet of Things, it also seems as if there will be a growing need to embed pieces of FPGA-like fabric into SoCs.
Colors are simply names we give to specific wavelengths or combinations of wavelengths that are received by our eyes. Maybe we each see colors differently.
Now we are ready to bring all the parts together and construct the GPS-driven, FPGA-decoded Nixie tube speedometer for use in a 1953 International pickup truck.
Here's an image of the week and a joke of the week. Also, this week's live online chat takes place Thursday, June 20, at 1:00 p.m. ET (10:00 a.m. PT).
Duane is now poised to use his I2C interface to send commands to the driver boards controlling his robot avatar's motors.
|
Tweet This
