jacklsw86
8/8/2012 4:58:47 AM
User Rank Blogger
picoblaze synthesized wrongly in synplify pro?
I started to play around with picoblaze(KCPSM6) and tried to fit it into my project's Spartan 6 chip. Weird thing is the picoblaze synthesized by xilinx's XST is able to complete implementation whereas for picoblaze synthesized by synplify pro is not able to get past mapping (with some pack:2811 errors).
I intended to fit in picoblaze in the existing FPGA design for some hacking/debugging purposes and the whole project is synthesized in synplify pro so I need to get picoblaze workable in synplify pro as well but seems like there's some obstacles in my way :(
Well, I'll try to talk to xilinx guy who implemented picoblaze, he seems pretty helpful.
Re: PicoBlaze
@nsuresheee: I agree. Even if you don't have an imperitive need to use PicoBlaze, it's nice to build one in so it's available for "housekeeping stuff" like monitoring switches or flashing LEDs...
Re: In support of Blinky
@Bill: Quite apart from anything else, when you plug a board in it's nice to see a LED flash on and off just to tell you that power is getting through...
Re: In support of Blinky
@jacklsw86: Good point -- flashing the LEDs is a simple task, so looking at th eway the code was written (and commented) tells you a lot...
PicoBlaze
Paul, I have spent quite some time with picoblaze in my projects which I used it with spartan 3 FPGA. I liked the idea of controlling the LED using the processor. I have used picoblaze with uart, spi, i2c and interrupt controller modules. Its nice educating about picoblaze in a forum like this.
Re: In support of Blinky
Bill - $.02 can go a long way with new hardware. I usually design a few LEDs onto my MCU board layouts with no purpose other than to help with my debuggin and test. I can always leave them de-populated in the final board if I want to save the few pennies.
jacklsw86
8/1/2012 3:11:36 AM
User Rank Blogger
Re: In support of Blinky
Well, you can roughly tell if someone's good in his/her codings by looking at how well the LEDs are programmed ;)
Re: In support of Blinky
@Duane--isn't it amazing how the blinking of a $.02 LED can tell you so much? Now I know why the "Blinky" program is included on so many eval and promotional boards.
Brian
7/31/2012 2:11:27 PM
User Rank Guru
Re: The error that gets me most often.
@Duane, Hamster: Re: "scratching my head wondering why I have no life at all..."
Ditto! We must have all taken this same course in college! :-)
Re: The error that gets me most often.
@Paul: Re your interview story, I have a similar tale. As part of an interview I was once asked how I would diagnose a board that was exhibiting strange behavior.
I replied that my first approach would be to take a WAG (wild ass guess) ... although I'm sure I didn't use those words ... based on whatever I could see (flashing lights, what other parts of the system were doing). My rational was that when you have experiance, just looking at what something is doing can give you a lot of clues as to what the fault might be.
I also said that if this failed, then I would revert to the methodical approach, going step-by-step through all the possible problems. The thing is that using your intuition can often get you where you want to be a lot faster than doing it "by the book" ... but you also have to know when to draw the line and say "OK, that wasn't the problem, now let's start from ground zero..."
|
 |
We consider complementary versus analogous colors and the meaning of terms like shade, tint, and hue. We also introduce the concept of psychological primary colors.
This "retrospective" blog describes how I became involved in testing microprocessors in 1976, and how microprocessors have influenced my professional work for many years...
The appellation "primary colors" refers to a small collection of colors that can be combined to form a range of additional colors, but which "small collection of colors" should we use as our primaries?
Today's FPGAs already integrate a substantial amount of "stuff" (MCU cores, programmable fabric, on-chip memory, etc.), so what's left to integrate and why is this being left for the future?
To celebrate Geek Pride Day, Sylvie Barak has created a mega-cool infographic that depicts how geeks have been building the Internet since 1832.
|
Tweet This
